PRODUCTS / AMERICAN / EUROPEAN BRAND SPECIALIZED TOOLS / KTM(48)

 
Model 14-K365
Item Name Compression Bolt Removal Tool
Descriptions It makes operator to properly torque the compression valve assembly during installation.<br> 17mm hex head.<br> Made from billet 6061 T-6 aluminum.<br>
 
Model 14-K365A
Item Name Compression Bolt Removal Tool
Descriptions It can fit for WP 4CS front forks and it is also one available for KTM WP front forks and one for KYB and 2010 CRF250R, 2013-2014 KX250F front forks.
 
Model 14-K366A
Item Name 6mm And 8mm Jet Wrench
Descriptions 2 sizes in one, 6mm on one end and 8mm on the other end, it fits round jets.<br> Another one with a rubber cap fits 6mm hex jets.<br>
 
Model 14-K366B
Item Name FCR Carburetors Tool
Descriptions It provides 4 tools : 6mm hex for main jets, a 3mm Allen for removing the float bowl and long-reach straight slot for pilot jets.<br> The longer one is an essential tool for reaching into recessed cavities to adjust Keihin FCR carburetors.<br>
 
Model 14-K370
Item Name Flywheel Puller<For KTM>
Descriptions It provides 4mm(M4 x 0.7 x 30L, 35L), 5mm(M5 x 0.8 x 40L), and 6mm (M6 x 1.0 x 40L) screws each size have two pieces.
 
Model 14-K371
Item Name Flywheel Puller M33 x 1.5 R.H.
Descriptions M33 x 1.5 R.H. Internal Thread
 
Model 14-K372
Item Name Flywheel Puller M50 x 1.5 R.H.
Descriptions M50 x 1.5 RH Internal Thread.<br> Includes crankshaft protector M16 x P1.5. <br>
 
Model 14-K379
Item Name Flywheel Puller M26 x 1.0<For KTM 4-Stroke>
Descriptions M26 x 1.0 right hand internal threads.<br> Puller includes 12mm shaft protector cap.<br>
 
Model 14-K393
Item Name Flywheel Puller M27 x 1.0 Lh Ext
Descriptions M27 x 1.0 Lh Ext.<br> Fits most late-model MX bikes.<br>
 
Model 14-K402
Item Name Fork Cap Wrench<For KTM 48mm WP>
Descriptions This 4 pins spanner wrench is ideal tool to loosen the KTM 48mm WP fork caps without removing the handlebars.
 
Model 14-K477
Item Name WP PDS Shock Needle Removal Tool
Descriptions Pin circle and pin dia : 15.0mm x 2.4mm.
 
Model 14-K486
Item Name Seal Retainer And Fork Cap Tool
Descriptions 22mm hex and 3/8"square drive.
 
Model 14-K504
Item Name Engine Lock-Up Tool<M14 x P1.25>
Descriptions It allows you to make the installation and removal of flywheels and flywheel weights faster and easier.<br> It also prevents the engine rotating when working on clutches and countershaft bolts.<br> It can into spark plug hole and stop the piston to prevent the engine from turning over.<br> A soft plastic tip design keeps the piston safe from damage.<br> Works on all two-stroke engines with a 14mm thread sparkplug.<br>
 
Model 14-K505
Item Name Power Valve Adjustment Tool
Descriptions An essential tool for adjusting power valve properly. It is used on KTM motorcycle models listed below : 200 SX 2004, 250 SX 2004-2010, 250 XC 2006-2010, 250 XCW 2006-2010, 250 EXC 2004-2005, 300 XC 2006-2010, 300 XCW 2006-2010, 300 EXC 2004-2005.
 
Model 14-K506
Item Name Crankshaft Mounting Tool
Descriptions This special tool fits KTM 1994 250/300 SX / MXC / EXC / EGS.
 
Model 14-K507
Item Name Clutch Shoe Tool
Descriptions It fits KTM 50 SX series.
 
Model 14-K514
Item Name Flywheel Holder Tool<For KTM>
Descriptions It fits KTM 50 series 02-08.
 
Model 14-K515
Item Name Unlocking Tool
Descriptions It fits KTM RC8 series.
 
Model 14-K516
Item Name Press Out Tool CPL.
Descriptions It fits KTM ATV 450 / 525 series.
 
Model 14-K517
Item Name A-Arm Needle Bearing Press Tool
Descriptions It fits KTM ATV 450 / 525 series.