Motorcycle Turn Handle Bearing Extractor

Model 14-K307
Features This high-quality tool is designed for shop or home mechanic.
Descriptions Made from alloy steel
The most convenient way for removing bearing.
We could have got it done quicker.
Optional removers are available for use on most models.
The tool contains 3 removers R51 (assembled), R48 and R44.
 

 

Tools to use :

  1. Check the turn handle bearing outside diameter. Choice an applicable remover.
  2. Put remover into bottom hole in the tool. Add to nut and tighten.
  3. Remover clamp into bearing provide knife edge to get behind when there is not a good gripping edge.
  4. Use a adaptor to tapped on top of turn handle.
  5. Use a traditional T-Handle socket or ratchet with socket tighten slowly  the six-point pressure screw. Repeat until the bearing has been separated.
  6. Loosen the pressure screw. Take out the bearing.